1. <acronym id="a67km"></acronym>
      <optgroup id="a67km"><em id="a67km"><pre id="a67km"></pre></em></optgroup><ol id="a67km"><output id="a67km"><nav id="a67km"></nav></output></ol>

        • Technical Data
        • Hardware
        • Manual
        • Certificate

        BCS100

        BCS100 capacitive height controller provides excellent performance in distance control. It served as height follow unit for FSCUT laser cutting control system via Ethernet communication, can realize functions including height sensing, segmented and stepping pierce process, detect and find workpiece edge, vibration suppression etc. Latest anti-collision function can effectively avoid tip-up collision risk in production.

        Technical Data

        Model
        BCS100
        Applied system
        FSCUT2000/3000/4000
        Applied software
        CypCut/TubePro
        Work voltage
        24V DC/2A
        Interface type
        Ethernet TCP/IP
        Motor control signal
        Analog output, -10~+10V
        Follow range
        0.2mm-25mm
        Sample frequency
        1000Hz
        Static measure precision
        0.001mm
        Dynamic response precision
        0.05mm
        Maximum speed
        999mm/s
        Maximum acceleration
        2G
        Noise suppression
        10%
        Minimum mechanic rigidity
        2Hz
        DA resolution
        16-bit
        DA zero drift
        3mv
        DA response
        0.01ms
        Work environment
        Temperature: 0~55℃
        Humidity: 5%~95%(no condensation)
        For PRECITEC laser head, select BCS100 Pro

        Benefits

        Anti-collision function can effectively avoid tip-up collision risk in production
        Add protection in find edge process to avoid laser head hits machine slat when exceed sheet border
        Support vibration suppression to restrict laser head resonating with vibrated thin sheet under pressured gas
        Support real time capacitance calibration, and automatically offset the local capacitance change caused by temperature drift, collision, nozzle dismantle and plasma cloud
        Work with cutting software can realize the functions of 'find workpiece edge', 'frog-leap' and 'stepping pierce' etc.
        Support lock down function for security or payment collection
        Support local or online firmware update
        Support oscilloscope function to monitor real time capacitance and height change

        Application

        Pressured gas will vibrate thin-walled material intensively especially in the marginal area without solid support. BCS100 can effectively suppress the signal noise caused by vibration, down below demonstrates the comparison of cutting performance with and without suppression function.This function requires BCS100 firmware V3.0.3152 and above.

        BCS100
        Components
        BCL-AMP Preamplifier
        BCL-AMP

        Number:1

        BCS100 Capacitive height controller
        BCS100

        Number:1

        Accessories
        C15-1.5/2.5/4 Servo cable
        C15-1.5/2.5/4

        Number:1

        HC-15/HC-20 4-pin cable
        HC-15/HC-20

        Number:1

        LAN-3X/LAN-0.3X/1X/7X/17X Network cable
        LAN-3X/LAN-0.3X/1X/7X/17X

        Number:1

        SPC-140/SPC-180/140B/180B RF cable
        SPC-140/SPC-180/140B/180B

        Number:2

        ×

        Welcome to contact us by email

        版權所有?上海柏楚電子科技股份有限公司 CopyRight?Shanghai BOCHU Electronic Technology Co., Ltd.

        Shanghai BOCHU Electronic Technology Co., Ltd. reserves the right to modify the software version and description of product models on the website without prior notice

        滬ICP備14033040號-1

        版權所有?上海柏楚電子科技股份有限公司

        CopyRight?Shanghai BOCHU Electronic Technology Co., Ltd.

        Follow us Disclaimer
        請使用電腦瀏覽器訪問
        国语自产免费精品视频|亚洲精品国产精品乱码不卞20..|久久99国产精品二区护士|av男人的天堂亚洲更新最快
          1. <acronym id="a67km"></acronym>
            <optgroup id="a67km"><em id="a67km"><pre id="a67km"></pre></em></optgroup><ol id="a67km"><output id="a67km"><nav id="a67km"></nav></output></ol>