1. <acronym id="a67km"></acronym>
      <optgroup id="a67km"><em id="a67km"><pre id="a67km"></pre></em></optgroup><ol id="a67km"><output id="a67km"><nav id="a67km"></nav></output></ol>

        • Technical Data
        • Hardware
        • Software
        • Manual

        FSCUT6000

        FSCUT6000 High Power EtherCAT is a cost-effective EtherCAT bus laser cutting control system. Easy installation and debugging, excellent performance, and inclusive solutions for cutting medium thick plates for steel structures, iron towers, ships, etc. Functions like Smooth MicroJoint, Flash Piercing, and 5-Stage Piercing, can improve processing efficiency; Functions like Deslag and Corner Technique, can improve the quality of processing thick plates.

        Technical Data

        Control Software
        CypCutPro Laser Cutting System
        Control Card
        BMC228B
        Interface
        PCIe bus, X4 and up
        I/O terminal board
        HPL2720E
        Power supply
        24V DC/3.5A
        Motor control signal
        EtherCAT Servo
        Dedicated output
        4 DA outputs: 0~10V, 12bit, ±20mV
        1 PWM output: 24V, precision of 5KHz (0.3%)
        Common input
        27 common inputs
        Active low, <15.6V
        IN1~IN3 can change to active high, > 5.8V
        Common output
        20 common outputs
        Max load per channel: DC 24V/700mA
        Work environment
        Temperature: 0~60℃
        Humidity: 10%~90%RH(no condensation)

        Benefits

        Technique
        Smooth MicroJoint: smooth cross section at MicroJoints for easy unloading and efficient production.
        Fast Piercing: extremely fast piercing for high efficiency of piercing thin plate.
        Deslag: remove slags after piercing and improve the piercing quality of thick plates.
        5-Stage Piercing: piercing for even thicker plates.
        Flash Piercing: fast frequency conversion piercing to improve the efficiency of piercing thick plates.
        Corner Technique: improve the processing quality of the corner of a part.
        Circle Centering: quickly locate the center of a circular plate to improve the processing efficiency.
        One-Path FlyCut: cut any graphics without lifting the cutter to zero reference for a faster cutting speed.
        Quick CutOff: cut off the plate along the X or Y direction with one click.
        Vertex Marking: mark the bounding box of graphics to be cut for a clear processing range.
        Frame Border Contour: ensure parts on non-rectangular plates are within the plates for safe production.
        Built-in Nesting: free and easy nesting for higher plate utilization.
        Control
        Real-time EtherCat: easy to extend.
        Virtual Multi-Station: set multiple stations on one machine tool to improve processing efficiency.
        Side Anti-Collision: lift the cutter again, if a side object is detected during traveling , so side collision to the cutter is prevented.
        FrogLeap Skip: smart adjust the height of the cutter during traveling to prevent the collision with tilted parts.
        Protective FindEdge: protect the cutter from hitting the rack during edge finding.
        Torque Monitor: monitor the servo torque, and stop immediately when it hits a heavy object to ensure both the machine tool and the operator safe.
        Fast Import: scan QR code to import drawings, which is fast and accurate.
        Coil machining: machining on coils to improve cutting efficiency.
        InkJet Printer: print codes to mark parts quickly without damages.
        Nozzle Cleaning: auto clean the nozzle to extend the nozzle life and improve machining quality.
        Torque check: monitor the dual drive shaft state to avoid torsion.
        Flexible Acceleration: flexible acceleration and deceleration for a longer machine tool life.
        Motion
        Theoretical control accuracy 0.005mm, practical trajectory accuracy 0.01mm, position accuracy 0.001mm, repetitive position accuracy 0.002mm.
        Unlimited maximum travel speed and maximum machining speed.
        Maximum acceleration 2G.

        Application

        For high-power fiber laser cutting machines of 6kW~12kW, widely used in ships, iron towers, steel structures and other industries.

        FSCUT6000
        Components
        BMC228B master card bmc228a
        BMC228B

        Number:1

        HPL2720E EtherCAT terminal board
        HPL2720E

        Number:1

        WKB Wireless hand-held remote
        WKB

        Number:1

        BCS210E Height controller
        BCS210E

        Number:1

        CypCutPro CypCutPro
        CypCutPro is mainly used for medium and high power EtherCAT cutting systems, and has simple operation and rich functions. Functions such as "five-stage piercing", "flash piercing", "deslag piercing", "corner technique", "smooth micro joint" and "smooth piercing" improve medium and thick plate processing quality and processing efficiency.
        7.1.2330.8
        ×

        Welcome to contact us by email

        版權所有?上海柏楚電子科技股份有限公司 CopyRight?Shanghai BOCHU Electronic Technology Co., Ltd.

        Shanghai BOCHU Electronic Technology Co., Ltd. reserves the right to modify the software version and description of product models on the website without prior notice

        滬ICP備14033040號-1

        版權所有?上海柏楚電子科技股份有限公司

        CopyRight?Shanghai BOCHU Electronic Technology Co., Ltd.

        Follow us Disclaimer
        請使用電腦瀏覽器訪問
        国语自产免费精品视频|亚洲精品国产精品乱码不卞20..|久久99国产精品二区护士|av男人的天堂亚洲更新最快
          1. <acronym id="a67km"></acronym>
            <optgroup id="a67km"><em id="a67km"><pre id="a67km"></pre></em></optgroup><ol id="a67km"><output id="a67km"><nav id="a67km"></nav></output></ol>